Acoustic Leakage Testing Tank

EN ISO 17020. With acoustic test tank, all fuel tanks and your product, breathing, tightness testing done filling lines.

All stages of the test is recorded, the computer system automatically switches itself TURKAK EN 17020. report layouts.

Which should result in both vacuum and pressure applications used to test EN 12820 T4'N prepared sealing wanted

0.1 l / h of greater than one hundred percent of any loss detection is performed.

 

TORA AND CUSTOMER RIGHTS, AUTHORITIES AND RESPONSIBILITIES

TORA’s Responsibilities

  1. TORA will supply and use all the necessary precautions and safety equipment during the inspection activities as defined in laws and standards.
  2. TORA accepts and commits that any commercial and/or technological information about the customer gathered during the inspection activities cannot be disclosed to third parties, institutions and agencies under any condition without a written consent of the customer due to confidentiality principle. If this information has to be disclosed to third parties due to the laws, customer is informed as defined in the laws.

TORA’s Rights and Authorities

  1. TORA has the authority to withdraw, re-issue or cancel an issued report if needed. In all the cases, customers are informed via e-mail and verbally.
  2. The report numbers of cancelled reports are announced publicly on website.

Customer Responsibilities

  1. Customer is responsible to give certain and correct information about the inspection items or activities.
  2. Customer is supposed to accept “TORA and Customer Rights, Authorities and Responsibilities” conditions that are announced on official website of TORA on approving the offer form by signing it.
  3. Customer is responsible to make the preparations according to each inspection activities that are defined in the section of “Pre-Inspection Activities That Should Be Done By Customers” on TORA’s official website. Customer is supposed to accept that inspection activities are going to be performed by TORA if any required preparations are not done properly and has to pay any related expenses.
  4. Customer is responsible to give back the original inspection reports if requested by TORA.
  5. Customer has to destroy the copies of cancelled or withdrawn inspections reports and should not use anyway.
  6. Customer is supposed to accept that for Statistical Inventory Reconciliation inspection all the inspection activities are carried out by the information coming from the customer who is responsible for the accuracy of these data.

Customer Rights and Authorities

  1. Customer has rights to request any kind of data about the inspection activities.
  2. Customer has rights to complain or claim according to Complain and Claim Procedure announced on TORA’s official web site.
  3. Customer has rights to be informed about the reasons of withdrawn or cancelled inspection reports. Customer has rights to demand payments back if he/she does not any defects about the cancelled inspection reports.
  4. Customer has rights to demand information about the pre-inspection activities that should be done by customer.
  5. Customer has rights to demand information as mentioned in the laws about the information that is sent to third parties about the inspection activities due to the law.

PRE-INSPECTION ACTIVITIES THAT SHOULD BE DONE BY CUSTOMERS

  1. Customer is responsible for pre-inspection preparation for Tank Acoustic Tightness Tests follows:
    • Above the tank site area should be clear. There should not be a series physical problem for opening the manhole covers.
    • There should not be much mud, water or fuel in the manholes.
    • During the inspection test, the sales from inspected tank and any manifolded tanks should be stopped.
    • If necessary, tank automation system should be stopped.
    • During the inspection test, there should be an access to main electrical board in order to stop the required electrical equipment.

 

COMPLAINS AND CLAIMS

Customers can send complains and claims through the below mentioned ways. All complains and claims are handled according to below mentioned method.

 

CANCELLED INSPECTION REPORTS

Below mentioned inspection reports are cancelled from TORA. They are not valid.

Report No

Report Date

Report Type

Cancellation Date

W00064179-H3420

19.12.2016

Hydrostatic Pressure Test

14.06.2017

W00065260-H3420

29.12.2016

Hydrostatic Pressure Test

14.06.2017

W00065316-H3420

29.12.2016

Hydrostatic Pressure Test

14.06.2017

W00065866-H3420

10.01.2017

Hydrostatic Pressure Test

14.06.2017

W00066849-H3417

26.01.2017

Hydrostatic Pressure Test

14.06.2017

W00067605-H3420

26.01.2017

Hydrostatic Pressure Test

14.06.2017